Hot melt glue stick, abbreviated as glue stick, is a new type of environmentally friendly adhesive product. Due to its certain viscosity, it can be well bonded with a glue gun. How to operate it? Here’s a brief understanding:
- Firstly, hot melt adhesive needs to be used in conjunction with a glue gun. Prepare a glue gun and insert the glue stick into the glue slot from the rear end of the glue gun before turning it on;
- After preparing for the previous step, you can start the glue gun power supply. The glue gun gradually heats up and starts heating. Wait for 3-5 minutes to melt the glue stick and wait for the glue gun to flow out. Press the switch to align the muzzle with the object to be bonded, and evenly apply the extruded adhesive onto the surface of the object to be bonded. After applying evenly. Waiting for the adhesive to naturally cool and air dry indicates that the bonding has been completed.
Of course, not only can a hot melt glue gun be used, but also a lighter can be used to heat the glue stick. Either end of the glue stick can be directly baked with a lighter, and after melting, the glue can be applied to the surface position of the object to be bonded, and the glue can be pressed to solidify.
So is the glue stick firmly bonded?
Hot melt adhesive contains resin and adds tackifiers, antioxidants, etc. It is a thermoplastic adhesive, so its viscosity is very good. We have already applied many products to hot melt adhesive for bonding work in our daily lives. Due to its fast bonding speed, strong adhesion, and high efficiency, it is still very popular.
Leave a Reply